Using The Scope

1

Making Automatic Scope Measurements

Making Automatic Scope Measurements

The test tool offers a wide range of automatic scope measurements. You can display two numeric readings: READING 1 and READING 2. These readings are selectable independently, and the measurements can be done on the input A or input B waveform

To choose a frequency measurement for input A, do the following:

1

Display the SCOPE key labels.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Open the Reading 1 menu.

3

 

 

 

 

 

Select on A. Observe that the

 

 

 

 

 

 

highlight jumps to the present

 

 

 

 

 

 

 

 

 

 

 

 

measurement.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

Select the Hz measurement.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Observe that the top left of the screen displays the Hz measurement. (See Figure 8.)

To choose also a Peak-Peakmeasurement for Input B as second reading, do the following:

1

Display the SCOPE key labels.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Open the Reading 2 menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

Select on B. The highlight jumps

 

 

 

 

to the measurements field.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

Open the PEAK menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

Select the Peak-Peak

 

 

 

 

 

measurement.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13

Page 21
Image 21
Fluke 199, 196, 192 user manual Making Automatic Scope Measurements, Select the Peak-Peak