Fluke 192/196/199

Users Manual

Using the Tilt Stand

The test tool is equipped with a tilt stand, allowing viewing from an angle while placed on a table. From this position you can access the OPTICAL PORT at the side of the test tool. The typical position is shown in Figure 48.

Figure 48. Using the Tilt Stand

Resetting the Test Tool

If you want to reset the test tool to the factory settings, do the following:

1

Turn the test tool off.

 

 

 

 

 

 

2

Press and hold.

 

 

 

 

 

 

3

Press and release.

 

 

 

 

The test tool turns on, and you should hear a double beep, indicating the reset was successful.

4 Release.

Suppressing Key Labels and Menu’s

You can hide a menu or key label at any time:

Hide any key label or menu.

To display menus or key labels, press one of the yellow menu keys, e.g. the SCOPE key.

70

Page 78
Image 78
Fluke 199, 196, 192 Using the Tilt Stand, Suppressing Key Labels and Menu’s, Turn the test tool off, Press and hold