Fluke 199, 196, 192 user manual Saving Screens with Associated Setups

Fluke 192/196/199

Users Manual

Saving Screens with Associated Setups

To save a screen in memory location 10, do the following:		3	Highlight SCREEN+SETUP location 10.
1	Display the SAVE/PRINT key labels.

From this point the screen is frozen until you hide the SAVE/PRINT key labels again.

2 Open the Save menu.

Observe that free memory locations are indicated by an open square (p). Filled memory locations are indicated by a solid square (n).

4 Save the actual screen.

Note

The two record+setup memory locations store more than what is just visible on the screen. In TrendPlot or scope record mode the full recording is saved. In scope mode you can save all 100 replay screens in a single record+setup memory location.

58