Fluke 196, 199, 192 user manual Setting Trigger Level and Slope, Screen with all Trigger Information

Fluke 192/196/199

Users Manual

Setting Trigger Level and Slope

The Connect-and-View™ function enables hands-off triggering to display complex unknown signals.

When your test tool is in manual range, do the following:

Perform an auto set. AUTO appears at the top right of the screen.

Automatic triggering assures a stable display of virtually any signal.

From this point, you can take over the basic trigger controls such as level, slope and delay. To optimize trigger level and slope manually, do the following:

1	Display the TRIGGER key labels.
2	Trigger on either positive slope or
	negative slope of the chosen
	waveform.
3	Enable the arrow keys for manual
	trigger level adjustment.

Figure 26. Screen with all Trigger Information

4 Adjust the trigger level.

Observe the trigger icon that indicates the trigger position, trigger level, and slope.

At the bottom of the screen the trigger parameters are displayed. (See Figure 26.) For example, means that input A is used as the trigger source with a positive slope.

When no trigger is found, the trigger parameters appear in gray.

44