Fluke 196, 199, 192 user manual Using Vertical Cursors on a Waveform, Turn off the cursors

Using Replay, Zoom and Cursors	4
Making Cursor Measurements

Using Vertical Cursors on a Waveform

To use the cursors for a time measurement, do the following:

1	From scope mode, display the
	cursor key labels.
2	Press to highlight	. Observe
	that two vertical cursors are
	displayed. Markers (—) identify
	the point where the cursors cross
	the waveform.
3	If necessary, choose the trace:
	TRACE A ,B, or M (Mathematics).

4 Highlight the left cursor.

5	Move the left cursor to the
	desired position on the
	waveform.
6	Highlight the right cursor.

Figure 24. Time Measurement with Cursors

7	Move the right cursor to the
	desired position on the
	waveform.

The screen shows the time difference between the cursors and the voltage difference between the two markers. (See Figure 24.)

8 Turn off the cursors.

41