Fluke 2635A user manual Setting Date and Time, Year, Mn.dY

2635A

Users Manual

Setting Date and Time

Perform the procedure in Figure 2-21 to set the instrument internal clock and calendar, which must be correct since measurements are tagged with this time and date. The built- in clock accuracy is a nominal one minute per month. Once set to the correct date and time, clock and calendar operation is automatic and no further action is required.

SHIFT

INTVL

YEAR

0 0

- to -

9 9

Selecting the Year. Press the SHIFT key and then the INTVL key to enter the date/time menu. With YEAR displayed, use the up/down and left/right arrow keys to select the two numbers for the correct year, for example, 94 for 1994, then press the ENTER key.

ENTER

Mn.dY

0 0 . 0 0

- to -

9 9 . 9 9

ENTER

Selecting the Month and Day. With Mn.dY (Month.Day) displayed, use the up/down and left/right arrow keys to select four numbers for the correct month and day, for example, 07.21 for July 21, then press the ENTER key.

Hr:Mn

0 0 . 0 0

- to -

9 9 . 9 9

Typical

Required

ENTER

Selecting the Hour and Minute. With Hr:Mn (Hour:Minute) displayed, use the up/down and left/right arrow keys to select four numbers for the correct hour and minute (24-hour clock), for example, 14.38 for 2:38 pm, then press the ENTER key.

op33f.eps

Figure 2-21. Setting Date and Time

2-34