Using the Review Mode

2635A

Users Manual

Perform the procedure in Figure 2-18 to operate the Review Mode of operation. The Review Mode is used any time during or after operation of the Scan Mode. While the instrument is in the Scan Mode, the last, maximum, and measurements for each scanned channel are stored in memory and updated with each scan, forming the Review Array. For example, during scan operations, Ncan be used to monitor the maximum measurement of a channel in real time. The Review Array is cleared by a control sequence (see Figure 2-18 below), or by changing any parameter of any channel or the measurement rate. The Review Array can be printed out using the Lkey (see Figure

5-4). If the instrument is in the Review Mode and scanning using the memory card, any illegal memory card operations is noted only with a double "beep." If a double beep is heard, exit the Review Mode and check the memory card error (see Figure 2-16).

REVIEW

LAST

MIN

MAX

REVIEW

SHIFT

Examining the Review Values. Press the REVIEW key to start the Review Mode. Use the up/down arrow keys to select the channel for review, then use the left/right arrow keys to view the LAST (Last), MIN (Minimum), and MAX (Maximum) values recorded during the past scan intervals (scan can be active or inactive). Repeat for each channel of interest. A series of dashes,

-- - - -, indicates all review data has been cleared either by a control sequence (below), or by changing any parameter of any channel. OL indicates an overload. Press the REVIEW key to exit the Review Mode. If not cleared, review values will remain in memory for update with the next scan interval.

REVIEW

- - - - -

Clearing the Review Array. Press the Review key to start the Review Mode. Press the SHIFT key and then the REVIEW key to clear all review data from all channels. If the scan mode is not active, the display will change to dashes (- - - - -). If the scan mode is active, new values will appear. Press the REVIEW key again to exit the Review Mode.

op30f.eps

Figure 2-18. Using the Review Mode

2-30

2635A specifications

The Fluke 2635A is a highly advanced multichannel data acquisition system designed for engineers and technicians requiring precision and versatility in their measurement tasks. This instrument excels in monitoring and capturing data from various sources, making it a valuable tool in laboratories, production environments, and field applications.

One of the standout features of the Fluke 2635A is its ability to support up to 20 measurement channels. Users can simultaneously monitor multiple signals, which is crucial for complex testing scenarios where numerous variables need to be tracked. The device is equipped with a 6.5-digit precision measurement capability that ensures high accuracy and resolution in readings. This level of precision is particularly beneficial in applications such as environmental monitoring, research and development, and industrial process control.

The unit incorporates a variety of measurement modes, including voltage, current, temperature, and resistance, making it exceptionally versatile. The Fluke 2635A not only handles standard signals but also integrates with various transducers, providing extensive compatibility for users engaged in diverse testing applications.

To enhance data management, the Fluke 2635A offers advanced data logging capabilities. Data can be stored internally or transferred to external devices for further analysis. The internal memory can accommodate extensive datasets, which can be crucial in long-term monitoring tasks. Integration with external software enables users to analyze and visualize data effectively, allowing for informed decision-making based on comprehensive results.

The user interface is designed for ease of use, featuring a large, bright LCD display that clearly presents measurements and status information. The device is also equipped with a simple navigation system, allowing users to switch between channels and measurement types without hassle.

In terms of construction, the Fluke 2635A is built to withstand rigorous environments. It features a robust design that ensures reliability and durability, making it suitable for both laboratory settings and field operations. Furthermore, the device supports a wide temperature range, thus enabling usage in diverse conditions.

Overall, the Fluke 2635A is a powerful and flexible instrument that provides precise measurements across multiple channels, supporting a wide range of applications. Its advanced technology, combined with user-friendly features, makes it an essential tool for professionals in various fields. The combination of accuracy, flexibility, and durability solidifies its standing as a trusted choice for data acquisition and monitoring tasks.

Fluke 2635A user manual Using the Review Mode

Models: 2635A

2635A