Fluke 2635A user manual Recording Measurement Results During Scanning, MOdE

Models: 2635A

1 268
Download 268 pages 28.28 Kb
Page 96
Image 96

2635A

Users Manual

Recording Measurement Results During Scanning

Perform the procedure in Figure 3-4 to record measurement results onto the memory card. The destination for the scanned data can be the memory card, printer, both the memory card and printer, or no destination, where the results are not saved, except in the Review array (last, maximum, and minimum scanned values) and in the 100-scan internal memory FIFO (First In First Out) log queue. (The internal memory log queue is accessed only through the computer interface. See Chapter4, "Computer Operations.")The mode for recording to the memory card or printer can be all scanned data, scanned data only when any scanned channel is in alarm, or single scans when an alarm transitions into or out of alarm.

Note

Measurement results recorded onto a memory card are extracted only by a PC running the Starter or Logger applications software. If printed results are desired as well as recording to the memory card, then "both" must be selected in the procedure below and a printer must be connected to the RS- 232 port. See Chapter5, Printer Operations, for more information.

SHIFT

FILES

dESt

both Print CArd nonE

Setting the DESTINATION Parameter. Press the SHIFT key, release, then press the FILES key to open the destination menu. Select both (Both) to route measurement data to both the memory card and printer; select Card (Card) to route measurement data just to the memory card.

ENTER

MOdE

trAnS ALAr

ALL

Typical

ENTER Required

Selecting the Destination MODE. The destination mode determines when the memory card should record. Select trAns (Transition) to record one complete scan when a channel has transitioned into or out of an alarm limit. Select ALAr (Alarm) to record all channel scans while any channel is in an alarm condition (stopping when all channels are out of alarm). Select ALL (All) to record all scans.

op40f.eps

Figure 3-4. Recording Measurement Results During Scanning

3-8

Page 96
Image 96
Fluke 2635A user manual Recording Measurement Results During Scanning, MOdE