NetTool

Users Manual

NetTool is available in the following models:

NetTool Standard: provides single-ended testing of network devices. Also includes a Ping function and the capability to display VLAN traffic and CDP information.

NetTool Pro: includes all of the features in the standard model plus the ability to do inline testing between two devices, such as a PC and the network switch. The Pro model also includes the Reporter, a function that enables you to create and save test reports.

“Listen” to traffic between network devices to detect common connectivity problems (NetTool Pro and VoIP models only)

Generate resource reports to document network and PC performance (NetTool Pro and VoIP models only).

Care and Maintenance

Treat your NetTool tester with care to ensure the best performance. Clean the tester carefully by using a soft, slightly damp cloth. Never use harsh detergents, solvents, or abrasive cleaners.

NetTool VoIP: includes all of the features available in NetTool Pro plus the ability to monitor VoIP (Voice over IP) service.

Clean the LCD by gently wiping it with a soft cloth or tissue moistened with isopropyl alcohol.

NetTool Features

NetTool’s features and functions enable you to do the following:

Verify the reliability of cabling and cabling installations by testing for length, shorts, split pairs or opens, including pin-to-pin wiremapping

Check a PC’s configuration and identify its network

Ping network devices to verify connectivity

Package Contents

Take a moment to check the shipping container to make sure that the contents match the list below. If any item is missing, contact your place of purchase.

Four (4) AA batteries

Serial cable

RJ-45 cable

Wiremap adapter

1-2

Page 14
Image 14
Fluke Network Tester user manual Care and Maintenance, NetTool Features, Package Contents