Fluke Network Tester Cable Test Results, Wiremap, Cable Length, Opens, Shorts, and Splits

NetTool

Users Manual

Cable Test Results

If NetTool is connected to a patch cable, AutoTest evaluates the integrity of the cable and finds errors that might suggest a physical media problem. If a wiremap adapter is attached, NetTool performs deeper testing of the cable by additionally verifying pin-to-pin connectivity.

Wiremap

If a wiremap is attached, select (Wiremap icon).

The Crossover Cable screen (Figure 3-3) is displayed, which verifies the length of the cable and identifies the pinouts at each end:

Cable Length, Opens, Shorts, and Splits

To find out about the cable, move the cursor to the Spool

icon, then press SELECT.

The Cable screen is displayed, as shown in Figure 3-2:

afq34s.bmp

Figure 3-3. Wiremap Details

afq32s.bmp

Figure 3-2. Cable Status Screen

On this screen, NetTool accurately measures wire lengths within the cable and indicates whether there are any opens, shorts, or split pairs present.

3-2