NetTool

Users Manual

5.

Press SELECT to save the IP address for NetTool.

3. Do one of the following:

 

NetTool lists the updated address with the subnet and

To add an IP address to the list, select Add New

 

router IP addresses.

Device then add it to the list.

6.

In like manner, configure the subnet mask and router

To edit an existing address, select it then change

 

addresses.

any of the octets within the address.

 

NetTool assists you by entering the first parts of those

Selecting a Language for the Display Screens

 

addresses based on common addressing rules.

To select a language for your display screens:

 

 

Creating a List of IP Addresses to Ping

Select Ping List Editor to display a screen that lets you view, edit, or add to the lists of preset IP addresses that you previously downloaded using NetTool Toolkit.

You can add IP addresses to an existing list or edit an existing IP address within a list.

To add or edit an IP address:

1.Press an arrow key to move the cursor to the desired IP address.

2.Press SELECT.

1.Select Language.

2.Choose the desired language.

Obtaining Information about Your NetTool

To view information about your tester, such as the software version, serial number, and MAC address, select About NetTool.

Be sure to record the serial number and MAC address of your tester for future reference.

2-4

Page 26
Image 26
Fluke Network Tester user manual Selecting a Language for the Display Screens, Creating a List of IP Addresses to Ping