NetTool
Users Manual
Changing the System Settings
Select 
Settings to display the Settings menu:
afq42s.bmp
Figure 2-2. Settings Menu
On this menu, you can do the following:
•Check the battery level.
If NetTool is running on battery power, the battery
level indicator
is displayed at the top of every Setup screen.
•Select a unit of measurement (Feet or Meters).
•Enable/disable the Auto Off feature.
When Auto Off is enabled, NetTool automatically turns itself off if no key is pressed after 10 minutes elapses. This helps to conserve the tester’s battery power.
•Adjust the display contrast.
Select Contrast and then select 
to decrease the contrast or 
to increase the contrast.
•Set the time and date.
To supply a date and time:
1.In the first field, press the Up cor Down b arrow key to select the desired number.
2.Press the Right ` arrow key to advance to the next position.
3.After the desired time and date are displayed, press SELECT.
Notes
The format for time is hour:minutes:seconds. The format for the date is month:day:year.
The clock does not self adjust for local time zones changes. NetTool Blaster allows you to set the time for NetTool and even synchronize it with the PC clock (check NetTool Blaster’s Help for details).
