FortiWiFi-60A/AM FortiOS 3.0 MR4 Install Guide
10 01-30004-0283-20070215
About this document Introduction
About this document
This document explains how to install and configure your FortiWiFi unit onto your
network. This document also includes how to install and upgrade new firmware
versions on your FortiWiFi unit.
This document contains the following chapters:
Installing the FortiWiFi unit – Describes setting up, and powering on a
FortiWiFi unit.
Factory defaults – Provides the factory default settings for the FortiWiFi unit.
Configuring the FortiWiFi – Provides an overview of the operating modes of the
FortiGate unit and how to integrate the FortiWiFi unit into your network.
Configuring the modem interface – Describes how to configure and use a
modem with the FortiWiFi-60A/AM.
Using a wireless network – Outlines the considerations for wireless networking
and steps you can take to make your wireless network as efficient as possible.
FortiWiFi Firmware – Describes how to install, update, restore and test the
firmware for the FortiWiFi device.

Document conventions

The following document conventions are used in this guide:
In the examples, private IP addresses are used for both private and public IP
addresses.
Notes and Cautions are used to provide important information:
Note: Highlights useful additional information.
!
Caution: Warns you about commands or procedures that could have unexpected or
undesirable results including loss of data or damage to equipment.