Fortinet ORTIWIFI-60A /AM manual NAT/Route mode installation

NAT/Route mode installation Configuring the FortiWiFi

Figure 6: Example Transparent mode network configuration.

DMZ network

Web Server

	Hub or switch
		Mail Server
	DMZ
	WAN1
Internet
Router	FortiWiFi-60A
	Internal
		Internal
	Hub or switch	network

NAT/Route mode installation

This section describes how to install the FortiWiFi unit in NAT/Route mode. This section includes the following topics:

•Preparing to configure the FortiWiFi unit in NAT/Route mode

•DHCP or PPPoE configuration

•Using the web-based manager

•Using the command line interface

•Connecting the FortiWiFi unit to the network(s)

•Configuring the networks

Preparing to configure the FortiWiFi unit in NAT/Route mode

Use Table 9 on page 33 to gather the information you need to customize

NAT/Route mode settings.

You can configure the FortiWiFi unit in two ways:

•The web-based manager GUI is a complete interface for configuring most settings. See “Using the web-based manager” on page 33.

•The command line interface (CLI) is a complete text-based interface for configuring all settings. See “Using the command line interface” on page 35.

The method you choose depends on the complexity of the configuration, access and equipment, and the type of interface you are most comfortable using.

32	FortiWiFi-60A/AM FortiOS 3.0 MR4 Install Guide
	01-30004-0283-20070215