Factory default DHCP server configuration | Factory defaults |
Factory default DHCP server configuration
Using the factory default DHCP server settings, you can quickly configure the internal network and the FortiWiFi unit. See “Quick installation using factory defaults” on page 20.
Table 3: Factory default DHCP server configuration
Name | internal_dhcp_server |
|
|
Interface | Internal |
|
|
Default Gateway | 192.168.1.99 |
|
|
IP Range | 192.168.1.110 – 192.168.1.210 |
|
|
Network Mask | 255.255.255.0 |
|
|
Lease Duration | 7 days |
|
|
DNS Server 1 | 192.168.1.99 |
|
|
Factory default NAT/Route mode network configuration
When the FortiWiFi unit is first powered on, it is running in NAT/Route mode and has the basic network configuration listed in Table 4 on page 24. This configuration allows you to connect to the FortiWiFi unit
Table 4: Factory default NAT/Route mode network configuration
Administrator | User name: | admin | |
account | Password: | (none) | |
|
|
| |
| IP: | 192.168.1.99 | |
Internal interface | Netmask: | 255.255.255.0 | |
Administrative Access: | HTTP, HTTPS, | ||
| |||
|
| Ping | |
|
|
| |
| IP: | 10.10.10.1 | |
DMZ interface | Netmask: | 255.255.255.0 | |
| Administrative Access: | HTTPS, Ping | |
|
|
| |
| IP: | 192.168.100.99 | |
WAN1 interface | Netmask: | 255.255.255.0 | |
| Administrative Access: | Ping | |
|
|
| |
| IP: | 192.168.101.99 | |
WAN2 interface | Netmask: | 255.255.255.0 | |
| Administrative Access: | Ping | |
|
|
| |
| IP: | 0.0.0.0 | |
Modem interface | Netmask: | 0.0.0.0 | |
| Administrative Access: |
| |
|
|
| |
| IP: | 10.10.80.1 | |
|
|
|
24 | |
