Samsung DCS-408I manual MMC 720 Copy KEY Programming, Copy KEY Fromnone

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 720 COPY KEY PROGRAMMING

DCS

3

CI

3

CII

3

816

3

408i

3

408

3

For duplicating key assignments from one keyset to another. This can be done on a per-station basis or on all stations, but not on a group of stations. A limitation is that the original and target keysets must be of the same type, e.g. both 24B keysets or both 12B keysets. A further condition is that a Euro keyset can only be copied to another Euro keyset, and a non-Euro type only to an- other non-Euro type.

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear previous entry
ANS/RLS	Used to select ALL

ACTION

1.Open programming and select 720 Display shows

2.Enter the station number to copy to (e.g., 205)

OR

Press UP or DOWN keys to make selection and press RIGHT soft key to move cursor

DISPLAY

[201] COPY KEY FROM:NONE

[205] COPY KEY FROM:NONE

3.Enter station number to copy from (e.g., 203) and cursor returns to step 2

OR

Press UP or DOWN keys to make selection

[205]COPY KEY FROM:203

4.Press RIGHT soft key to return to step 2

OR

Press TRSF to store and exit

OR

Press SPEAKER to store and advance to next MMC

Default Data:	None
Related Items:	MMC 107 Key Extender
	MMC 721	Save Station Key Programming
	MMC 722	Station Key Programming
	MMC 723 System Key Programming

MMC 720 (Page 1 of 1)