| DCS | MMC PROGRAMS | |
| COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | |
|
|
|
|
| MMC: 312 ALLOW CLIP |
|
|
|
|
|
|
DCS
3
CI
3
CII
3
816
3
408i
3
408
7
Allows the system installer or administrator to:
§allow or prevent receipt of CLIP data from the network
§request or restrict sending of CLIP data to the network. Each station can have the following options:
SND: | YES | - | request the network to send Caller ID when outgoing call is made. |
| NO | - | request the network NOT to send Caller ID when outgoing call is made. |
RCV: | YES | - | allow display of CLIP data at keysets. |
| NO | - | prevent display of CLIP data at keysets. |
INFO: If YES selected for SND option, you can select the CLIP display option from
0CO Tel
1Extn. Number
2CO + Extn. No.
3DID Number.
ACTION
1.Open programming and select 312 Display shows
2.Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and press right soft key to move cursor
OR
Press ANS/RLS to select all
3.Dial 0 (NO) or 1 (YES) to select RCV option (e.g. 1)
OR
Press UP or DOWN to select option and press right soft key to move cursor to SND field
4.Dial 0 (NO) or 1 (YES) to select SND option (e.g. 1)
OR
Press UP or DOWN to select option and press right soft key
If you selected YES for SND option, display shows
Dial
OR
Press UP or DOWN to select Press RIGHT soft key
DISPLAY
[201] ALLOW CLIP RCV:YES SND:YES
[205]ALLOW CLIP RCV:YES SND:YES OR
[ALL] ALLOW CLIP RCV:YES SND:YES
[205]ALLOW CLIP RCV:YES SND:YES
[205]ALLOW CLIP RCV:YES SND:YES
[205]ALLOW CLIP
INFO:C.O Tel.
MMC 312 (Page 1 of 2)
