Samsung DCS-408I manual MMC 311 Assign SIM Parameter

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 311 ASSIGN SIM PARAMETER

DCS

✓

CI

✗

CII

✗

816

✗

408i

✗

408

✗

Assigns and sets parameters for the serial interface module (SIM). Refer to tables 1–12, below.

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear previous entry

ACTION

1.Open programming and select 311 Display shows

2.Enter station number connected to SIM (e.g., 257) from dial keypad

OR

Press UP or DOWN key to make selection and press RIGHT soft key to move cursor

DISPLAY

[256] SIM PARA SIM TYPE :DTE

[257]SIM PARA. SIM TYPE :DTE

3.Enter desired selection from table 1 (00–10, e.g. 01)

OR

Press UP or DOWN key to make selection and press RIGHT soft key to move cursor

Refer to table 1 for your selected option and go to the table indicated (e.g. 3) to enter required

value (e.g. 0) using dial keypad or by pressing UP or DOWN key

Press RIGHT soft key to move cursor

4.Repeat step 3 for all required options (00–10 in table 1)

5.Press TRSF to store and exit

OR

Press SPEAKER to store and advance to next MMC

TABLE 1. SIM PARAMETER
00	SIM TYPE	=	Table 2
01	CALL MODE	=	Table 3
02	ANS MODE	=	Table 4
03	AUTO BAUD	=	Table 5
04	DTR CHECK	=	Table 6
05	ECHO	=	Table 7
06	PROTOCOL	=	Table 8
07	SPEED	=	Table 9
08	CHAR LENGTH	=	Table 10
09	PARITY	=	Table 11
10	STOP BIT	=	Table 12

[257]SIM PARA. CALL MODE:AWITH

[257] SIM PARA.

CALL MODE:MANUAL

MMC 311 [DCS] (Page 1 of 2)