Samsung DCS-408I manual MMC 419 BRI Option, ∙ BRI Mode, ∙ Channel ANY, ∙ Dlsend, ∙ BRI Coding

DCS		MMC PROGRAMS
COMBINED PROGRAMMING MANUAL		NOVEMBER 2001
	MMC: 419 BRI OPTION

DCS

3

CI

3

CII

3

816

3

408i

3

408

7

This MMC comprises two groups of items. One group is for the "TRUNK" ports as set in MMC 423, S/T Mode, and the other is for the "STATION" ports. Be aware that some items will not be available on certain types of system.

Note: For each BRI access, two adjacent ports are assigned. You need only change the value for one of the two ports; the value for the other port will be changed automatically.

Ports Programmed as "TRUNK" in MMC 423

Display shows "BRI-TRK". Items to select include some or all of the following: BRI MODE, CHANNEL ANY, DLSEND and BRI CODING.

∙BRI MODE

P-P DDI: When BRI line is point-to-point configuration and is a DDI line. Incoming calls are placed as set in MMC 714 (DDI Number & Name Translation). All incoming calls through the DDI trunk will be placed according to the setting of the DDI table.

P-M NOR: When BRI line is point-to-multipoint configuration and is not an MSN line In- coming calls are placed as set in MMC 406 (Trunk Ring Assignment)

P-M MSN: When BRI line is point-to-multipoint configuration and is an MSN line. The sy s- tem can manage up to eight MSN numbers for each MSN BRI access. Incom- ing calls through P-MP MSN ports are handled as set in MMC 421 (MSN Digit). Each BRI access requires its own table.

P-P NOR: When BRI line is point-to-point configuration and is not a DDI line. Incoming calls are placed as set in MMC 406 (Trunk Ring Assignment).

∙CHANNEL ANY

This field can be set to YES or NO and is referenced when a user attempts an outgoing call while that port is busy.

If CHANNEL ANY is NO, user hears busy tone.

If CHANNEL ANY is YES, the system checks if the adjacent port (another B channel in the same BRI access) is free. If it is free, the user can call through that port. Otherwise, the user hears busy tone.

∙DLSEND

This field is provided to set the dial sending mode to "enblock" or "overlap" on an individual port basis.

∙BRI CODING

A-LAW or U-LAW (A-LAW in UK)

Note: Any change to BRI MODE option is effective only after restart of the BRI card. Use MMC 418, Card Re- start, to restart the card.

MMC 419 (Page 1 of 3)