Samsung DCS-408I manual MMC 604 Assign Station to Zone

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 604 ASSIGN STATION TO

PAGE ZONE

DCS

3

CI

3

CII

3

816

3

408i

3

408

3

Allows the assignment of a keyset to any of the internal paging zones 1 to 4 and All page (page plus ∗). The total number of keysets that can receive a page is limited to 80 (DCS) or 40 (Com- pact II) or 12 (816) or 4 (408/408i). A keyset may be assigned to more than one zone.

The assignment is controlled by the use of class marks. If a keyset is flagged as “1” in a zone column, it will receive pages for that zone. If the keyset is flagged as “0,” it will not receive pages for that zone. Keysets can receive pages for more than one zone.

Note: 408/408i systems are assigned internal page zones 1–2 only. Therefore, only these zones can be flagged as “1”. Zones 3 and 4 are flagged as “0.”

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear entry

ACTION

1.Open programming and select 604 Display shows

2.Enter index number (01–80 or 01–40 or 01–12 or 1–4 depending on your system–see above) via keypad (e.g., 04)

OR

Press UP or DOWN key to make selection and press RIGHT soft key to move cursor

DISPLAY

ENTRY:STN :1 2 3 4∗ 01:NONE:0 0001

ENTRY:STN :1 2 3 4∗ 04:NONE:00001

3.Enter station number (e.g., 205) via dial keypad

OR

Press UP or DOWN key to make selection and press RIGHT soft key to move cursor

ENTRY:STN :1 2 3 4∗ 04:205 :00 0 0 1

4.Move cursor under page zone desired (e.g. 2) by press- ing UP or DOWN key and enter the digit 1 under the zone

Press RIGHT soft key to return to step 2 to continue with entries

5.Press TRSF to store and exit

OR

Press SPEAKER to store and advance to next MMC

ENTRY:STN :1 2 3 4∗

04:205 :010 0 1

Default Data:	No stations assigned
	All zone is set (∗ )
Related Items:	None

MMC 604 (Page 1 of 1)