Samsung DCS-408I manual MMC 110 Station ON/OFF

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 110 STATION ON/OFF

DCS

3

CI

3

CII

3

816

3

408i

3

408

3

Allows the system administrator to set any of the followi ng keyset features.

AUTO HOLD	Automatically places an existing C.O. call on hold if a CALL key,
	trunk key or trunk route key is pressed during that call.
AUTO TIMER	Automatically starts the stopwatch timer during a C.O. call. (CALL
	COST option, below, should be OFF for this feature to work.)
HEADSET USE	When ON, this feature disables the hookswitch allowing a headset
	user to answer all calls by pressing the ANS/RLS key.
HOT KEYPAD	When ON, this feature allows the user to dial numbers on the keypad
	without having to first lift the handset or press the SPEAKER key.
KEY TONE	Allows the user to hear a slight tone when pressing keys on the key-
	set.
PAGE REJOIN	Allows the user to hear the latter part of page announcements if the
	keyset becomes free during a page.
RING PREFER	When OFF, requires the user to press the fast flashing button to an-
	swer a ringing call after lifting the handset.
CALL COST	If enabled (ON), LCD shows real-time call cost based on Metering
	Pulses arrived. (See AUTO TIMER option.)
AME BGM	Determines whether a station using Answering Machine Emulation
	will hear their personal greeting or background music (BGM) while
	callers are listening to the personal greeting. A BGM source must be
	selected for this to work. (Cadence and SVMi-4 voice mail systems
	only.)
AME PSWD	Sets the Answering Machine Emulation password ON or OFF. (Ca-
	dence and SVMi-4 voice mail systems only.)
NOT CONT.CID	When ON, the keyset displays the call timer for the duration of an in-
	coming trunk call (if AUTO TIMER is ON). When OFF, the CLIP num-
	ber for a call is displayed for the duration of the call. (Not applicable
	to 408 systems.)

Note: Keyset users can set or change these options for their own keyset (refer to the Samsung DCS Keyset User Guide for details).

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear previous entry
ANS/RLS	Used to select ALL

MMC 110 (Page 1 of 2)