Samsung DCS-408I manual MMC 414 MPD/PRS Signal, TRK PRS None, Mpd, Related Items MMC 508 Call Cost

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 414 MPD/PRS SIGNAL

DCS

3

CI

3

CII

3

816

3

408i

7

408

3

Used on a per-trunk basis to define if a C.O. line is to be either a Metering Pulse (MPD) or a Po- larity Reversal Signal (PRS) trunk. (Note: PRS is not available in the UK.)

A Meter Pulse Trunk will detect a C.O.-provided meter pulse. A Polarity Reversal trunk will detect the line reversal signal which may be provided by the C.O. when the other party answers the out- going call or the outside party clears the call. If the trunk is designated as PRS detection, the call duration timer will be started and the results printed on the SMDR record. PRS detection is also essential for dropping a trunk-to-trunk conversation which is unsupervised by an internal party.

ACTION

1.Open programming and select 414 Display shows

2.Enter desired trunk number (e.g. 705)

OR

Press UP or DOWN key to select trunk and use LEFT or RIGHT soft key to move cursor

3.Press UP or DOWN key to scroll through options and use LEFT or RIGHT soft key to return to step 2

4.Press TRSF to store and exit

OR

Press SPEAKER to store and advance to next MMC

DISPLAY

[701] TRK PRS NONE

[705]TRK PRS NONE

[705]TRK PRS

MPD

Default Data:	NONE
Related Items:	MMC 508 Call Cost

MMC 414 (Page 1 of 1)