| DCS | MMC PROGRAMS | |||
| COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | |||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 204 COMMON BELL CONTROL
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
Determines whether the common bell relay contacts have an interrupted or continuous closure when activated. If interrupted is chosen, the relay follows an internal ring pattern of one second closed followed by three seconds open.
By default, all common bell relay pairs are assigned as:
DCS: 380x
Compact II: 363–365
816:362
408 and 408i: 361
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor |
SPEAKER | Used to store data and advance to next MMC |
ACTION
1.Open programming and select 204 Display shows current setting
(Note: Display differs according to system)
2.Dial common bell number
OR
Press UP or DOWN key to make selection of common bell numbers and press RIGHT soft key to advance cursor
DISPLAY
[3801]COM. BELL CONTINUOUS
OR
[363] COM/LD BELL CONTINUOUS
3.Dial 0 for continuous or 1 for interrupted operation
OR
Use UP or DOWN to scroll through options Press RIGHT soft key to return to step 2
4.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
[3801]COM. BELL INTERRUPTED
OR
[363]COM/LD BELL
INTERRUPTED
Default Data: | Continuous | |
Related Items: | MMC 203 | Assign UA Device |
| MMC 219 Common Relay Service Type | |
| MMC 601 | Assign Station Group |
MMC 204 (Page 1 of 1)
