Samsung DCS-408I manual ∙ Channel ANY See above, ∙ Power Feed, Channel ANY YES

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

Ports Programmed as "STATION" in MMC 423

Display shows "BRI-STN". Items to select include some or all of the following: CHANNEL ANY, POWER FEED (see note) and BRI CODING.

∙CHANNEL ANY (See above.)

∙POWER FEED

This field determines if power to a BRI access will be supplied (YES or NO).

Note:

1.Any change to The Power Feed option is effective only after restarting the BRI card. Use MMC 418 to restart the card.

2.Only DCS (excluding Compact I) andCompact II systems provide a Power Feed option to the S0 In- terface. (See Table 1 in the S0 Overview section of this manual (Part 3, Special Applications).)

∙BRI CODING

A-LAW or U-LAW (A-LAW in UK)

In BRI-STN, options DLSEND and BRI MODE are not included because the system uses implicit data for these: enblock for DLSEND and P-MP for BRI MODE.

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advanc e to next MMC
HOLD	Used to clear previous entry

ACTION

1.Open programming and select 419 Display shows

2.Dial BRI trunk number (e.g. 703)

OR

Press UP or DOWN key to select the port For TRUNK ports (TRK), go to step 3.a For STATION ports (STN), go to step 3.b

DISPLAY

[701] BRI-TRK CHANNEL ANY : YES

OR

[701] BRI-STN CHANNEL ANY : YES

3.a Display is as shown for TRUNK ports

Use the RIGHT soft key to position the cursor under

CHANNEL ANY

[703] BRI-TRK

CHANNEL ANY : YES

MMC 419 (Page 2 of 3)