DCS | MMC PROGRAMS | ||||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 705 ASSIGN SYSTEM
SPEED DIAL
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
Allow you to assign system speed dialling numbers. The number of entries available for pro- gramming is 500 (DCS and Compact II), or 300 (816), or 200 (408/408i)
#.If the system recognises a valid trunk or trunk group access number, it will automatically insert the separator.
System speed dials are numbered as follows:
DCS |
|
Compact II |
|
816 |
|
408/408i |
|
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
“B” | Used to insert a flash code "F" |
”C” | Used to insert a pause code "P" |
”D” | Used to insert a pulse/tone conversion code "C" |
”E” | Used to mask/unmask following digits - shows as "[" or "]" |
”F” | Used to toggle to MMC 706 and enter name for speed dial no. |
Keys “A” to “F” are keys #19 to #24 on a 24B keyset, or keys #7 to #12 on a 12B keyset, or keys #1 to #6 on a 6B keyset
ACTION
1.Open programming and select 705 Display shows
2.Enter the speed dial required (e.g., 505)
OR
Press UP or DOWN key to make selection and press RIGHT soft key to move cursor
DISPLAY
SYS SPEED DIAL
500:
SYS SPEED DIAL
505:
3.Enter access code (e.g., 9) plus the phone number up to 24 digits (digits will scroll under)
4.Press “F” key to toggle to MMC 706 (step 3) to enter a speed name for this number
OR
Press RIGHT soft key to return to step 2 to enter another speed dial number
SYS SPEED DIAL
SYS SPEED NAME 505:_
MMC 705 (Page 1 of 2)
