DCS | MMC PROGRAMS | ||||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 712 LCR ROUTE TABLE
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
The LCR ROUTE TABLE is responsible for selecting a specific trunk group in the completion of an outgoing call. This table works in conjunction with LCR DIGIT TABLE, LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED DIGITS TABLE. After the user dials a valid digit string, the sys- tem uses the LCR ROUTE TABLE to select a specific predetermined trunk group. A maximum of 16 routes are available beginning with ROUTE NUMBER 1. If more than one trunk group is avail- able for call completion, the system uses the first designated trunk group and then starts to util- ise succeeding trunk groups. If all trunk groups are busy in a selected route, call queue becomes active and allocates trunks as they become available.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
ACTION
1.Open programming and select 712 Display shows
2.Dial LCR ROUTE index number
OR
Press UP or DOWN to selected index and press RIGHT soft key to move cursor
DISPLAY
LCR ROUTE (01:1)
C:1 | G:9 | M:001 |
| ||
LCR ROUTE (05:1) | ||
C:1 | G:9 | M:005 |
|
|
|
3.Dial TIME BAND index number
OR
Press UP or DOWN to selected index and press RIGHT soft key to move cursor
LCR ROUTE (05:2)
C:1 G:NONE
4.Dial LCR COS number
OR
Press UP or DOWN to selected COS and press RIGHT soft key to move cursor
LCR ROUTE (05:2) C:4 G:NONE
5.Dial TRUNK GROUP access code (e.g., 9)
OR
Press UP or DOWN to selected access code and press RIGHT soft key to move cursor
6.Dial MODIFY DIGITS index number
OR
Press UP or DOWN to selected index number and press RIGHT soft key to move cursor
OR
Press RIGHT soft key to leave entry unchanged
LCR ROUTE (05:2)
C:4 G:9
LCR ROUTE (05:2)
C:4 G:9 M:050
LCR ROUTE (05:2)
C:4 G:9
MMC 712 (Page 1 of 2)
