Samsung DCS-408I manual MMC 200 Open Customer Programming, Press Trsf 200 Display shows

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 200 OPEN CUSTOMER

PROGRAMMING

DCS

3

CI

3

CII

3

816

3

408i

3

408

3

Used to open (enable) or close (disable) customer-level programming by the system administra- tor. If programming is not opened and an attempt is made to access a customer-level MMC, the error message [NOT PERMIT] will be displayed. A four-digit passcode is required to enable cus- tomer programming (which can be changed in MMC 201, if required). Each digit can be 0–9. When opened, this MMC allows access to all MMCs specified by the system installer in MMC 802, Customer Access MMC Number.

PROGRAM KEYS
UP & DOWN	Select open or closed
KEYPAD	Used to enter passcode
SPEAKER	Save data and advance to next MMC
TRSF	Exit Programming

ACTION

1.Press TRSF 200 Display shows

2.Enter passcode

Correct code shows

Incorrect code shows

3.Dial 1 for ENABLE or 0 for DISABLE OR

Press UP or DOWN arrow key to select ENABLE or DISABLE and press RIGHT soft key

DISPLAY

ENABLE CUS.PROG. PASSCODE:_

ENABLE CUS.PROG. PASSCODE: ∗∗∗∗

ENABLE CUS.PROG. DISABLE

ENABLE CUS.PROG. PASSWORD ERROR

ENABLE CUS.PROG. ENABLE

4.Press SPEAKER to advance to MMC entry level and press UP or DOWN key to select MMC (e.g. 212)

OR

Enter MMC number and press RIGHT soft key to enter MMC

5.Press TRSF key to exit

212:ALARM RING SELECT PROG. ID

Default Data:	DISABLE (closed)
	Passcode=1234
Related Items:	MMC 201 Change Customer Passcode
	MMC 501 System-Wide Timers
	MMC 802 Customer Access MMC Number

MMC 200 (Page 1 of 1)