Samsung DCS-408I manual MMC 715 Programmed Station Message

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 715 PROGRAMMED STATION

MESSAGE

DCS

3

CI

3

CII

3

816

3

408i

3

408

3

Allows a custom message, up to 16 characters, to be programmed. There are 20 messages al- lowed in total (01–20). Messages 01–10 are pre-set (see default data) but can be changed by de- leting and/or typing in new text. Messages 11–20 are blank by default (“EMPTY MESSAGE” may be displayed if one of these is selected, or the display is blank).

Messages are written via the keypad. Each press of a key selects a character. Pressing a differ- ent key moves the cursor to the next position. For example, if the message is “In the Showroom,” press key number “4” three times to get the letter “I.” Then press key number “6” twice to get the to move the cursor right. Continue selecting characters from the keypad to complete your message. Press the programmable ”A” key to toggle between upper

and lower case text.

Tip: When the character you want is on the same key as the previous character you typed in, press the UP key to move the cursor to the right, then select the character.

The # key can be used for the following special characters (in sequence of key presses):

#

space

&

!

:

?

.

,

%

$

-

<

>

/

=

[

]

@

^

(

)

_

+

{

}

;

"

→

`

PROGRAM KEYS

UP & DOWN

Used to scroll through options

KEYPAD

Used to enter selections

SOFT KEYS

Move cursor left and right

SPEAKER

Used to store data and advance to next MMC

HOLD

Used to clear previous entry

“A”

Key #19 (24B keysets) or key #7 (12B keysets) or key #1 (6B key-

sets) toggles upper case and lower case text.

ACTION

1.Open programming and select 715 Display shows

2.Enter index number (e.g., 11)

OR

Press UP or DOWN arrow to make selection and press RIGHT soft key to move cursor

DISPLAY

PGM.MESSAGE(01)

IN A MEETING

PGM.MESSAGE(11)

EMPTY MESSAGE

MMC 715 (Page 1 of 2)