Samsung DCS-408I manual MMC 212 Alarm Ringing Station, Device, Compact

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 212 ALARM RINGING STATION

DCS

3

CI

7

CII

3

816

7

408i

7

408

7

Used to determine which devices will be alerted when an alarm sensor is activated.

Device	DCS	Compact II
Station	201–349	201 - 308
Station group	500–529	500 - 519

The above devices will ring like a doorphone and follow the door ring time-out. When ringing, display keysets show the display assigned in MMC 213, Alarm Message. The bottom line of the keyset display gives an option to clear the alarm. Ringing initiated by an alarm sensor is an- swered by going off-hook and on-hook again at a ringing keyset. If a device such as Ring Over Page or a common bell is the only device assigned to ring, it may be answered by assigning a direct pickup key with this device as the extender. If the alarm is unanswered by the door ring time-out, ringing will cease but the display will remain until cleared by dialling the alarm clear fea- ture code (57) and passcode (default 8765).

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear previous entry

ACTION

1.Open programming and select 212

Display shows first sensor (3501 on DCS system or 351 on Compact II system)

2.Dial sensor number (e.g., 3502 or 352)

OR

Use UP or DOWN to scroll through sensor numbers and press RIGHT soft key to advance cursor

DISPLAY

[3501]ALARM RING D:500 N:500

[3502]ALARM RING D:500 N:500

3.Enter valid ring destination for day (e.g., 205)

OR

Press UP or DOWN key to make selection and press RIGHT soft key to advance cursor

Select night destination in the same way

4.Press TRSF to store and exit

OR

Press SPEAKER to store and advance to next MMC

[3502]ALARM RING D:205 N:500

Default Data:	All sensors ring 500 day/night
Related Items:	MMC 213 Alarm Message

MMC 212 [DCS / Compact II] (Page 1 of 1)