
DCS | MMC PROGRAMS | ||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||
|
|
|
|
| MMC: 421 MSN DIGIT |
|
|
|
|
|
|
DCS
3
CI
3
CII
3
816
3
408i
3
408
7
Provides a method of assigning an incoming MSN call to a specific station. If any entry in MSN DIGIT TABLE matches an incoming call's called party number, either the specific station is alerted, if it is programmed to accept the call, or the call is cleared if it is programmed to reject the call.
If the incoming called party number does not have a matching entry in the MSN table, the opera- tor is alerted.
You can give each MSN number to a specific station and you can select a call waiting option: when a destination is busy, the incoming call must be cleared or
There is a total of eight entries on a trunk basis and each entry consists of the following fields:
DIGITS | Digits to be received (maximum of 10). |
DAY DEST | Destination in day mode - can be a station or a station group. |
| Repeat (B) will be acceptable to the system if received digit is within |
| numbering plan for a station or station group. |
. |
|
NIGHT DEST | Destination in night mode - can be a station or a station group. |
| Repeat (B) will be acceptable to the system if received digit is within |
| numbering plan for a station or station group. |
CALL WAIT | Toggles YES or NO: if YES then the call will be |
| destination while NO gives busy indication. |
OPTION | Accept: the selected destination party will be alerted. |
| Reject: the call is cleared. |
Note: For each BRI access, two adjacent ports are assigned. You need only change the value for one of the two ports; the value for the other port will be changed automatically.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
MMC 421 (Page 1 of 2)