DCS | MMC PROGRAMS | ||||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 804 SYSTEM I/O PARAMETER
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
Provides a means of setting parameters for the system I/O ports to work with one of the follow- ing:
∙a personal computer (PC)
∙Station Message Detail Recording (SMDR)
∙UCD statistics report/periodic UCD information (except 408/408i)
∙CTI (TSAPI) interface (DCS and Compact II only).
All systems have two I/O ports (Ports 1 and 2), except 408/408i which have one I/O port (Port 1). Programming can be accomplished easily, using the tables below to customise any I/O port.
PARAMETER OPTIONS |
| |
Dial 0 | Service | Type of Service |
Dial 1 | Baud Rate | Speed |
Dial 2 | Char Length | Character Length |
Dial 3 | Parity | Parity Bit |
Dial 4 | Retry Count | Number of Retries |
Dial 5 | Stop Bit | Stop Bit |
Dial 6 | Wait Time | Message Wait Time |
Dial 7 | DSR Check | DSR Check on/off (Compact II, 816 and 408/408i only) |
| or |
|
| SIM Pair | No. of the station connected to the Serial Interface Module |
|
| (SIM) (DCS only) |
SERVICE TYPE
Each port can be set to one of the following service types. Note that the services available depend on the type of system being programmed. For example, DCS and CII systems provide all the following services while 408/408i systems provide
Type | Description |
|
|
PC application | |
SMDR | SMDR report (call logging) |
UCD REPT | UCD report on request by the |
| supervisor, or daily |
UCD/SMDR | Both SMDR and UCD report will |
| be generated |
CTI | Dedicated Switch Link Interface |
CTI/SMDR | CTI and SMDR |
CTI/UCD | CTI and UCD |
CTI/S/U | CTI, SMDR and UCD |
VM TRACE | Voice Mail monitoring |
NOT USE | Not used |
MMC 804 (Page 1 of 3)
