Samsung DCS-408I manual MMC 205 Assign Loud Bell, Loud Bell Ring Pair None

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 205 ASSIGN LOUD BELL

DCS

3

CI

7

CII

3

816

3

408i

3

408

3

Designates the station that controls the loud bell ring output of one of the following:

DCS systems—a Trunk A card. Each Trunk A card has one loud bell output; these outputs are given a Directory Number of 3901–3920 as a default value to enable them to be assigned.

Compact II systems—a Misc card (assigned in MMC 219, Common Relay Service Type).

816 and 408/408i systems—a base board (assigned in MMC 219, Common Relay Service Type).

The loud bell will follow the ring cadence of the designated station. Only a station can be as- signed to control the loud bell; a station group cannot be assigned.

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Clears previous entry

ACTION

1.Open programming and select 205 Display shows current setting

2.Dial loud bell number (e.g., 362)

OR

Use UP or DOWN to scroll through loud bell

numbers and press RIGHT soft key to move the cursor

3.Enter station number (e.g., 201)

OR

Press UP or DOWN key to make selection and press RIGHT soft key to return to step 2

4.Press TRSF to store and exit

OR

Press SPEAKER to store and advance to next MMC

DISPLAY

[361] LOUD BELL RING PAIR : NONE

[362]LOUD BELL RING PAIR : NONE

[362]LOUD BELL

RING PAIR :201

Default Data:	NONE (Unassigned)
Related Items:	MMC 219 Common Relay Service Type

MMC 205 (Page 1 of 1)