DCS | MMC PROGRAMS | ||||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 726 VM/AA OPTIONS
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
Provides a flexible means of setting
The following options may be selected for VM/AA operation:
0 | EXT FOR DN1 | DTMF information for the station that called the VM/AA | |
|
|
| port station which is forwarded to VM/AA port. |
1 | TRK FOR DN1 | DTMF information for the trunk that called the VM/AA | |
|
|
| port. |
2 | EXT FOR DN2 | DTMF information for the station that originated the call | |
|
|
| to a station which is forwarded to a VM/AA port. |
3 | TRK FOR DN2 | DTMF information for the trunk that called a station for- | |
|
|
| warded to a VM/AA port. |
4 | SEPARATOR | In cases where DN2 is used, this specific digit is sent | |
|
|
| between the DN1 and the DN2 information. Both DN1 |
|
|
| and DN2 must be set to YES for SEPARATOR to be sent. |
5 | DISCONNECT SIGNAL | This signal is sent when the calling station or C.O. line | |
|
|
| hangs up. |
6 | CALL TYPE ID | Under this VM/AA option are several customising appli- | |
|
|
| cations: |
| 0 | DIRECT CALL | A call originating directly from another station in the sy s- |
|
|
| tem. |
| 1 | ALL FWD CALL | This indicates that a call was forwarded to the VM/AA |
|
|
| port from a station with CALL FORWARD ALL set. |
| 2 | BSY FWD CALL | This indicates that a call was forwarded to the VM/AA |
|
|
| port from a station with CALL FORWARD BUSY set. |
| 3 | NOA FWD CALL | This indicates that a call was forwarded to the VM/AA |
|
|
| port from a station with CALL FORWARD NO ANSWER |
|
|
| set. |
| 4 | RECALL | A call is recalling the VM/AA port after being transferred |
|
|
| and not answered. |
| 5 | DIR TRK CALL | A C.O. call has gone directly to VM/AA (e.g., trunk 717 |
|
|
| DIL to VM/AA). |
| 6 | OVERFLOW | A call has OVERFLOWED to the VM/AA port from a sta- |
|
|
| tion group. |
| 7 | DID CALL | A DDI call has called the VM/AA port. |
| 8 | MESSAGE CALL | A message button or message reply feature code has |
|
|
| been used to call the VM/AA port. |
7 | PROGRESS TONE ID | DTMF digits can be sent in place of normal system | |
|
|
| tones. Digits can be assigned to the following tones: |
MMC 726 (Page 1 of 3)
