DCS | MMC PROGRAMS | ||||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 737 DECT SYSTEM CODE
DCS
3
CI
3
CII
3
816
7
408i
7
408
7
Used to identify your DECT system and the handsets you register with your system.
The DECT System Code for your system is made up of two fields: the System ID which is three hexadecimal digits in the range 001 to 999; and the Auth Code (short for Authentication Code) which is four hexadecimal digits in the range 0000 to 9999. The default values are 000 and FFFF respectively.
Important:
You must use this MMC to change the default values for the values you have been provided with by your supplier. If you do not change the defaults you will not be able to register handsets.
Once you have entered your new System ID and Auth Code using this MMC you can then begin registering your handsets with the Auth Code. The system checks the Auth Code entered for each handset against the DECT Auth Code. If it is the same, the registration procedure contin- ues; otherwise, the DCS rejects the registration procedure.
Caution: Only the system administrator and/or installer should be allowed access to change the DECT System Code and register handsets.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
ACTION
1.Open programming and select 737 Display shows
2.Press RIGHT soft key to move cursor and enter AUTH CODE via dial keypad (eg 1234)
3.Press RIGHT soft key and press VOL UP or DOWN to select SYSTEM ID
4.Press RIGHT soft key to move cursor and enter SYS- TEM ID via dial keypad (eg 567)
5.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
DISPLAY
DECT SYSTEM CODE AUTH CODE : FFFF
DECT SYSTEM CODE AUTH CODE : 1234
DECT SYSTEM CODE SYSTEM ID : 000
DECT SYSTEM CODE SYSTEM ID : 567
Default Data: | Auth Code | FFFF |
| System ID | 000 |
(These values must be changed by the installer)
MMC 737 [DCS / Compact II] (Page 1 of 2)
