| DCS | MMC PROGRAMS | |||
| COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | |||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 103 SET ANSWER MODE
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
Allows the system administrator to change the answer mode of any keyset. Each keyset can have its answer mode set to one of the following options:
0.RING: The keyset will ring in one of eight custom ring patterns. Calls are answered by pressing the ANS/RLS key or by lifting the handset.
1.AUTO ANSWER: After giving a short attention tone, the keyset will automatically answer calls on the speakerphone. When a C.O. line is transferred to a keyset in Auto Answer mode, the screened portion of the call will be Auto Answer, but the keyset will ring when the transfer is complete if the user has not pressed the ANS/RLS key or lifted the handset.
2.VOICE ANNOUNCE: The keyset will not ring. After a short attention tone, callers can make an announc ement but the ANS/RLS key or hand set must be used to answer calls.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
ANS/RLS | Used to select ALL |
ACTION
1.Open programming and select 103 Display shows
2.Dial keyset number (e.g., 205)
OR
Press UP or DOWN to select keyset
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select All
3.Dial 0, 1 or 2 to change ring mode
OR
Press UP or DOWN to select ring mode and press RIGHT soft key to return to step 2
4.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: | All keysets = RING |
| Ring frequency default = 5 |
DISPLAY
[201] ANS MODE RING MODE
[205]ANS MODE
RING MODE
[ALL] ANS MODE
?
[205]ANS MODE VOICE ANNOUNCE
Related Items: | MMC 111 Keyset Ring Tone |
MMC 103 (Page 1 of 1)
