Samsung DCS-408I manual MMC 500 SYSTEM-WIDE Counters, Dial Counter Description

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 500 SYSTEM-WIDE COUNTERS

DCS

3

CI

3

CII

3

816

3

408i

3

408

3

Used to set the values of the system counters. The counters are listed below with a brief descrip- tion of each.

DIAL	COUNTER	DESCRIPTION
0	ALARM REMINDER	The number of times that an alarm reminder will ring a station
		before cancelling. RANGE = 1–99.
1	AUTO REDIAL	The number of times the system will redial an outside number
		after the auto redial feature has been activated. RANGE = 1–15.
2	DISA CALL	Sets the maximum number of internal calls that can be made
		after accessing a DISA line. RANGE = 1–99.
3	DISA LOCK	Number of attempts the system will allow to incorrectly access a
		DISA line before locking out the DISA line. RANGE = 1–99.
4	NEW CALL	Number of times the system will allow a user to signal New Call
		on a C.O. line during one call. RANGE = 1–99.
5	UCDS VISUAL	Used to set the Visual Alarm threshold. It is triggered when the
	ALARM*	number of calls waiting to be answered in the UCD group
		reaches this value. RANGE = 0–25.
6	UCDS AUDIO	Used to set the Audio Alarm threshold. It is triggered when the
	ALARM*	number of calls waiting to be answered in the UCD group
		reaches this value. RANGE = 0–25
7	UCD CS LEVEL 1*	Provides call wait indication level 1 if number of calls waiting to
		be answered in UCD group reaches this value. RANGE = 0–25.
8	UCD CS LEVEL 2*	Provides call wait indication level 2 if number of calls waiting to
		be answered in UCD group reaches this value. RANGE = 0–25.

* Options 5–8 are not available on 408/408i systems.

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear previous entry
ANS/RLS	Used to select ALL

MMC 500 (Page 1 of 2)