Samsung DCS-408I manual Timer Descriptions

DCS		MMC PROGRAMS
COMBINED PROGRAMMING MANUAL		NOVEMBER 2001
PARK RECALL	45 SEC	0–255 SEC
PC-MMC LOCK (not 408)	5 MIN	1–60 MIN
POWER DOWN	2000 MS	1000–9900 MS
RECALL DISCONECT	2 MIN	1–255 MIN
RECALL WAIT	15 SEC	1–255 SEC
SMDR START/DP	30 SEC	1–255 SEC
SMDR START/DTMF	15 SEC	1–255 SEC
SYS HOLD RECALL	45 SEC	0–255 SEC
TRANSFER RECALL	20 SEC	0–255 SEC
UCDS AUDIO ALARM (not 408/408i)	0 SEC	0–255 SEC
UCDS VISUAL ALARM (not 408/408i)	0 SEC	0–255 SEC
VMS UCD MSG (816 only)	5 SEC	1–99 SEC
VOICE DIAL DELAY (not 816 or 408/408i)	8 SEC	5–15 SEC
R/D RING ON (not used)	–	–
R/D SIGNAL ON (not used)	–	–
PERI UCD REPORT (not 408/408i)	5 SEC	3–99 SEC

Timer Descriptions

AAINT DGT: Controls the grace period between dialling valid digits before transferring call to INVLID DEST as set in MMC 733 on a per-plan basis.

AANO ACT: Time AA will wait for first digit for processing, after which call is transferred to the desti- nation set in NO ACT DEST in MMC 733.

AATRANS: After this time, compare input digit with AA translation table (MMC 732) and transfer to destination.

ALERT TONE: Sets the duration of the attention tone preceding a call to a keyset in the Voice An- nounce or Auto Answer mode. This tone also precedes a forced Auto Answer call.

ALM REM INTERVAL: Controls the time between ring attempts at a station when alarm reminder is set.

ALM REM RING OFF: Controls the length of the ring cycle when alarm reminder is set at a station.

ATT RECALL: The length of time a transfer recall will ring at a station before recalling the operator.

AUTO REDIAL INT: Controls the time between attempts after RETRY dialling is set on a station.

AUTO REDIAL RLS: Controls the duration of a Ring No Answer condition on a retry number dialled before the auto redial is automatically cancelled.

BARGE-IN TONE INT: Controls the interval between the tones sent to the station being barged in on.

CALLBACK NO ANS: Controls the time before the callback is automatically cancelled when a call- back detects Ring No Answer.

CAMP ON RECALL: Controls how long a camped-on call will stay at a destination before recalling to the transferring station.

MMC 501 (Page 3 of 6)