DCS | MMC PROGRAMS | ||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||
|
|
|
|
| MMC: 420 PRI OPTION |
|
|
|
|
|
|
DCS
3
CI
7
CII
3
816
7
408i
7
408
7
Allows the system DDI/NORMAL access and sets dial sending mode (DLSEND) on an individual port basis to OVERLAP or ENBLOCK. However, if you change the dial sending mode of one port, all other ports must be set to the same dial sending mode. If your PRI line is not registered for DDI service at the Central Office, you can use NORMAL service (e.g. subaddress or normal trunk incoming service). If you set PRI MODE to DDI, you can service DDI (Direct Dial Inward) to a spe- cific station or station group according to DDI NUMBER TABLE.
There is also a CHANNEL ANY option. If set to YES, when a call is initiated the channel used is specified by the network; if set to NO, when a call is initiated the DCS/Compact II will specify which channel to use.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
ACTION
1.Open programming and select 420 Display shows
2.Dial PRI trunk number (e.g. 704)
OR
Press UP or DOWN key to select the port Press the RIGHT soft key to move the cursor
DISPLAY
[701] PRI OPTION CHANNEL ANY:YES
[704]PRI OPTION CHANNEL ANY:YES
3.Press UP or DOWN key to make selection (CHANNEL ANY, PRI MODE or DLSEND) and press RIGHT soft key to move the cursor
4.Use UP or DOWN key to make selection and press RIGHT soft key to return to step 2
5.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
[704]PRI OPTION DLSEND : OVERLAP
[704]PRI OPTION DLSEND : ENBLOCK
Default Data: | CHANNEL ANY: | YES |
| PRI MODE: | DDI |
| DLSEND: | OVERLAP |
Related Items: | MMC 418 Card Restart |
|
| MMC 406 Trunk Ring Assignment | |
| MMC 714 DDI Number and Name Translation | |
MMC 420 [DCS / Compact II] (Page 1 of 1)
