Samsung DCS-408I manual BRI-TRK Note, BRI-STN Note

DCS	SPECIAL APPLICATIONS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

Order of Programming

Carry out programming as shown in the diagram, below.

MMC 423

S/T mode

S

T

MMC 424	MMC 419
S0 Mapping (NOTE 1)	BRI-TRK (NOTE 2)

MMC 419	MMC 421
BRI-STN (NOTE 2)	MSN Digit (NOTE 3)

MMC 418

Card Restart

Program MSN in your

ISDN terminal (NOTE 4)

Note:

1.This item does not have to be programmed prior to MMC 419 or MMC 418 (because those MMCs have no effect on this item). However, this item must be preceded by MMC 423.

2.This item displays its name as "BRI-TRK" or "BRI-STN" according to the port setting in MMC 423.

3.This item is only applicable when a BRI access is programmed as P-MP MSN in MMC 419.

4.Only for a STATION port set in MMC 423.

Example of programming a STATION port

Assume that you have a BRI card installed in DCS and its ports are numbered from 701 to

708.You want to use the 4th BRI access (707 and 708) as a STATION port to connect ISDN terminals. The procedure is:

3–19