
DCS | MMC PROGRAMS |
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 |
8.If option 4 is selected at step 2
(A valid entry consists of digits
9.If option 5 is selected at step 2
(A valid entry consists of digits
10.If option 6 is selected at step 2
(A valid entry consists of digits
characters
See above list under CALL TYPE ID options list
11.If option 7 is selected at step 2
(A valid entry consists of digits
characters
See above list under PROGRESS TONE ID
12.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
EXT FOR DN1 = Yes
TRK FOR DN1 = Yes
EXT FOR DN2 = No
TRK FOR DN2 = No
SEPARATOR = No
DISCONNECT SIGNAL = C
CALL TYPE ID:
DIRECT CALL | 1 |
ALL FWD CALL | 2 |
BSY FWD CALL | 3 |
NOA FWD CALL | 4 |
RECALL | 5 |
DIR TRK CALL | 6 |
OVERFLOW | 7 |
DDI CALL | 8 |
MESSAGE CALL | 9 |
PROGRESS TONE ID = No (for all)
Related Items: | MMC 207 Assign VM/AA Port |
SEPARATOR
NO
DISCONECT SIGNAL C
CALL TYPE ID DIRECT CALL : NO
PROGRESS TONE ID DIAL TONE :NO
MMC 726 (Page 3 of 3)