Samsung DCS-408I manual MMC 105 Station Speed Dial, No Speed Block

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 105 STATION SPEED DIAL

DCS

3

CI

3

CII

3

816

3

408i

3

408

3

Allows the system administrator to program personal speed dial numbers for stations. This may be particularly useful for single line telephones which are more difficult to program by the station user. Each station can have up to five blocks of speed dials—each containing 10 numbers (giv- ing a total of 50 numbers)—assigned to it in MMC 606, Assign Speed Block. By default, each sta- tion has one block (for 10 numbers) assigned.

Speed dials are numbered 00–49. Each speed dial may contain a trunk or trunk group access code (e.g. 9) followed by a separator (–) and up to 24 digits to be dialled. These dialled digits can be 0–9, [ and #. If the system recognises a valid trunk or trunk group access number, it will automatically insert the separator.

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear previous entry
“B”	Used to insert a flash code “F”
”C”	Used to insert a pause code “P”
”D”	Used to insert a pulse/tone conversion code “C”
”E”	Used to mask/unmask following digits (shows as “[“ or “]”)
”F”	Used to enter name for speed dial bin (see MMC 106)

Keys “A” to “F” are keys #19 to #24 on 24B keysets, or keys #7 to #12 on 12B keysets, or keys #1 to #6 on 6B keysets.

ACTION		DISPLAY
1.	Open programming and select 105
			[ 201] SPEED DIAL
	Display shows		00 :
2.	Dial station number (e.g. 205)
			[205] SPEED DIAL
	OR		00 :
	Press UP or DOWN to select station and press RIGHT
	soft key to move cursor
	If selected station has no speed dial blocks assigned,		[ 205] SPEED DIAL
	the display will be as shown and a new station may be		NO SPEED BLOCK
	selected.
3.	Enter speed dial number (e.g., 05)
			[205] SPEED DIAL
	OR		05: _
	Press UP or DOWN to select location and press RIGHT
	soft key to move cursor

4.Enter trunk access code (e.g., 9) followed by the number to be dialled (e.g., 08104264100)

If you make an error, press the HOLD key to clear an entire entry or use the DOWN key to move the cursor back

[205]SPEED DIAL 05 : 9-08104264100_

MMC 105 (Page 1 of 2)