DCS | MMC PROGRAMS | ||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||
|
|
|
|
| MMC: 423 S/T MODE |
|
|
|
|
|
|
DCS
3
CI
3
CII
3
816
3
408i
3
408
7
Used to select the function of each BRI access. You can set a BRI access as "TRUNK" to which an ISDN C.O. line is connected, or as "STATION" to which an ISDN terminal is connected.
For each BRI access, two adjacent ports are assigned. You need only change the value for one of the two ports; the value for the other port will be changed automatically.
Note: Any change made in this MMC will take effect only after restarting the BRI card. Use MMC 418, Card Restart, to restart the card.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
ACTION
1.Open programming and select 423 Display shows
2.Dial BRI trunk number (e.g. 703)
OR
Press UP or DOWN key to select the port Use the RIGHT soft key to position the cursor under TRUNK (or STATION)
DISPLAY
[701] S/T MODE TRUNK
[703]S/T MODE TRUNK
3.Press UP or DOWN key to make selection (TRUNK or STATION)
Press RIGHT soft key to position the cursor under the port number again
4.For other ports, repeat steps 2 and 3
5.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: | TRUNK |
|
Related Items: | MMC 418 Card Restart | |
| MMC 419 | BRI Option |
| MMC 424 | S0 Mapping |
[703] S/T MODE STATION
MMC 423 (Page 1 of 1)
