![](/images/new-backgrounds/1197434/197434517x1.webp)
DCS | MMC PROGRAMS | ||||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 801 CHANGE TECHNICIAN
PASSCODE
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
Used to change the passcode which allows access to MMC 800 (Enable Technician Program) from its current value.
Note: The passcode is four digits long. The current or “old” passcode is required for this MMC.
PROGRAM KEYS |
|
KEYPAD | Used to enter passcodes |
SPEAKER | Save data and advance to next MMC |
ACTION
1.Open programming and select 801
2.Enter new passcode
3.Enter new passcode again to verify
4.If verification is correct, press RIGHT soft key to con- tinue and enter desired MMC
If verification is incorrect display shows “Failure” and system returns to step 2
5.Press TRSF to store and exit
OR
Press SPEAKER to advance to MMC
DISPLAY
TECH. PASSCODE NEW CODE:_
TECH. PASSCODE NEW CODE:∗∗∗∗
TECH. PASSCODE VERIFY :∗∗∗∗
TECH. PASSCODE VERIFY :SUCCESS
TECH. PASSCODE VERIFY :FAILURE
Default Data: | Default passcode = 4321 |
Related Items: | MMC 800 Enable Technician Program |
MMC 801 (Page 1 of 1)