DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 804 (Page 2 of 3)
SPEED (BPS)
Dial
DCS/CII/816 408/408i
600 0 N/A
1200 1 2
2400 2 3
4800 3 4
9600 4 5
19200 5 N/A
CHARACTER LENGTH
Dial 7 7 bits
Dial 8 8 bits
PARITY
Dial 0 None
Dial 1 Odd
Dial 2 Even
STOP BIT
Dial 1 1 bit
Dial 2 2 bit
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear entry (when valid)
ACTION DISPLAY
1. Open programming and select 804
Display shows
SYS I/O PORT (1)
SERVICE:PC-MMC
2. Enter desired port via dial keypad (e.g. 2) (note:
408/408i systems have port 1 only)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
SYS I/O PORT (2)
SERVICE:SMDR
3. Enter parameter option from the above option list via
dial keypad (e.g. 1)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
SYS I/O PORT (2)
BAUD:9600 BPS