DCS | MMC PROGRAMS | ||||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 732 AA TRANSLATION TABLE
DCS
3
CI
7
CII
3
816
3
408i
7
408
7
This command gives more flexibility to the system by compiling a digit to Plan or Destination Translation Table, which performs the translation from dialled digit(s) into destination parts. Des- tination parts can be a station number, station group, REPEAT, Change Greeting Message Code or AA Plan Table.
If you select REPEAT by pressing the “B” key in the destination field, dialled digits may be by- passed without translating.
Number of Table Entries
AATrans Tables 01 and 02 can have up to 100 entries each (but only 50 each on 816 systems). Tables
∙If you press the “A” key in the destination field, you can enter AA TRANS NO.
∙If you press the “B” key you can enter REPEAT.
∙If you press the “C” key you can enter CHANGE GREETING MESSAGE CODE.
∙If you press the “D” key, this takes the call to voice mail.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
ACTION
1.Open programming and select 732
Display shows (note: number of entries for table 01 may show as “001” or “01”, etc. depending on system)
2.Dial TABLE number
OR
Press UP or DOWN Press RIGHT soft key
DISPLAY
AA TRANS TB (01)
001:0 → 500
AA TRANS TB (02)
001:→NONE
3.Dial ENTRY number
(see Number of Table Entries, above), e.g 002
OR
Press UP or DOWN Press RIGHT soft key
4.Enter Dial DIGIT (e.g. 2∗∗) Press RIGHT soft key
AATRANS TB (02)
002: →NONE
AATRANS TB (02) 002:2∗∗_ →
MMC 732 (Page 1 of 2)
