DCS | MMC PROGRAMS | ||||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 744 DECT REGISTRATION ON/OFF
DCS
3
CI
3
CII
3
816
7
408i
7
408
7
Allows DECT handset registration to be enabled on a keyphone system. If this MMC is not opened and an attempt is made to register a DECT handset, an error message will be displayed. The default passcode for registration can be changed using MMC 202, Change Feature Pass- codes.
Caution: When you have finished registering handsets, run this MMC again to set the regis- tration mode to DISABLE. This will prevent unauthorised access to this feature.
PROGRAM KEYS
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
ACTION
1.Open programming and select 744 Display shows
2.Enter passcode
If the correct code is entered the display shows
An incorrect code entry shows
DISPLAY
ENABLE DECT REG. PASSCODE:
ENABLE DECT REG. PASSCODE:[[[[
ENABLE DECT REG. DISABLE
ENABLE DECT REG. PASSCODE ERROR
If the SYSTEM ID in MMC 737 (DECT System Code) has not been set, this message will be displayed:
3.Dial 1 for ENABLE or 0 for DISABLE OR
Press UP or DOWN key to select and press RIGHT soft key
4.Press TRSF key to exit
OR
Press SPEAKER button to store and advance to next
MMC
Default Data: | DISABLE |
Related Items: | MMC 202 Change Feature Passcodes |
| MMC 737 DECT System Code |
| MMC 738 DECT Clear Registration |
| MMC 739 BSI Download |
| MMC 741 BSI Card Restart |
| MMC 742 BSI Status |
| MMC 743 DBS Status |
| MMC 745 BSI Carrier |
ENABLE DECT REG. NO REG. SYSTEM ID
ENABLE DECT REG. ENABLE
MMC 744 [DCS / Compact II] (Page 1 of 1)
