| DCS | MMC PROGRAMS |
|
| COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 |
|
|
|
|
|
|
|
|
|
MMC: 722 STATION KEY PROGRAMMING
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
Used to customise programmable keys on individual keysets and
Functions can also be entered via the dial keypad. For example, to assign the OHVA function, key number 6 can be pressed three times. If the BOSS function is required, press 2 twice for the first letter B, and then use the UP or DOWN key to change the selection from BARGE to BOSS.
Note: 408/408i systems do not support AOMs and default key functions are different from other systems. For example, keys 1 and 2 are not set as CALL keys by default as these are not required.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
ACTION
1.Open programming and select 722 Display shows
OR
For 408/408i systems, display shows
(but the programming procedure is the same as follows)
2.Enter station number (e.g., 205)
OR
Press UP or DOWN key to make selection and press RIGHT soft key
DISPLAY
[201] KEY (MAST) 01:CALL1 →
OR
[21] KEY PROG 01:DT71 →
[205]KEY (MAST) 01:CALL1 →
3.If you have a 408/408i system, or if selected station has no AOM pair, go to step 4
Enter 0 for MAST, 1 for AOM1 or 2 for AOM2.
OR
Press UP or DOWN key to make selection and press RIGHT soft key
4.Enter key number (e.g., 18)
OR
Press UP or DOWN key to make selection and press RIGHT soft key
OR
Press programmable key
[205]KEY (MAST) 01:CALL1 →
[205]KEY (MAST)
18:NONE →_
MMC 722 (Page 1 of 3)
