DCS | MMC PROGRAMS |
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 |
ACTION
1.Open programming and select 107 Display shows
OR
For 408 and 408i systems, display shows:
2.Dial station number (e.g., 205)
OR
Use UP or DOWN to scroll through station numbers and press RIGHT soft key to move the cursor
DISPLAY
[201] EXT (MAST) 01:CALL1 →
OR
[21] EXT EXTEND 01:DT71 →
[205]EXT (MAST)
01:CALL1 →
3.Enter key number (e.g., 18)
OR
Press UP and DOWN to scroll through keys and use RIGHT soft key to move the cursor
OR
Use above table to select desired extender System will return to this step
4.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
[205] | EXT (MAST) |
18:DS | → _ |
|
|
205] EXT (MAST)
18:DS →DS207
Note: If the RIGHT soft key will not move the cursor to the right, you are attempting to add an extender to a key that cannot have one (refer to the table, above, for allowed key extenders).
Default Data: | None |
|
Related Items: | MMC 720 Copy Key Programming | |
| MMC 721 | Save Station Key Programming |
| MMC 722 | Station Key Programming |
| MMC 723 System Key Programming | |
MMC 107 (Page 2 of 2)
