DCS | MMC PROGRAMS | ||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 | ||
|
|
|
|
| MMC: 508 CALL COST |
|
|
|
|
|
|
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
Allows the system administrator to set the Call Cost attributes generated by the system during a call. This information can be displayed on the keyphone LCD during a call or as an SMDR re- cord.
Attributes are as follows: |
|
0 UNIT COST PER MP | When the system is installed to receive MP on a C.O. outgoing call. It |
| is used for generating total call cost by multiplying it by the number |
| of pulses. Allows a maximum value of 5000. |
1 CALL COST RATE | This generates additional call cost calculated by multiplying this rate |
| by the original call cost. Ranges from 100 to 255. |
WARNING
∙Changing a value when there is a call in progress may result in an inaccurate call cost.
∙This MPD facility requires the Meter Pulse Detection version of the trunk card. It is not avail- able on the standard product.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
ACTION
1.Open programming and select 508 Display shows
2.Dial 0 or 1 (e.g. 1)
OR
Press UP or DOWN key for selection and press RIGHT soft key to move cursor
DISPLAY
UNIT COST PER MP 0200PENCE→
CALL COST RATE 100% →_
3.Enter new value (e.g. 110 for 110 percent) System returns to step 2
4.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
CALL COST RATE 110% →
Default Data: | UNIT COST PER MP | 200 pence |
| CALL COST RATE | 100 percent |
Related Items: | MMC 110 Station On/Off | |
| MMC 414 MPD/PRS Signal | |
MMC 508 (Page 1 of 1)
