Samsung DCS-408I manual MMC 603 Assign Trunk Group, TRK Group Modesequential

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 603 ASSIGN TRUNK GROUP

DCS

3

CI

3

CII

3

816

3

408i

3

408

3

Allows the assignment of trunks to a specific trunk group or to several trunk groups. This is very useful for programming of LCR when more than one trunk is to be in several dialling plans. There are two different modes of operation: (1) sequential and (2) distribute.

WARNING: One trunk can appear in more than one trunk group. If necessary, delete the trunk member from other groups to prevent accidental access.

The number of trunk groups is:

DCS and Compact II — 11: valid groups are 9 and 80–89.

816 — Four: valid groups are 9 and 80–82.

408/408i — Two: valid groups are 9 and 8.

Valid number of members of trunk groups are:

DCS:	01–80
Compact I:	01–10
Compact II:	01–40
816:	01–10
408/408i:	1–4

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear previous entry
ANS/RLS	Used to select ALL

ACTION

1.Open programming and select 603 Display shows (e.g. trunk group 9)

2.Enter in valid trunk group (see above)(e.g. 81)

OR

Press UP or DOWN key to make selection and press RIGHT soft key to advance cursor

DISPLAY

[9] TRK GROUP MODE:SEQUENTIAL

[81]TRK GROUP MODE:SEQUENTIAL

3.Press RIGHT soft key to change mode

OR

Press UP or DOWN key to change mode to member

4.Press RIGHT soft key to move cursor to number of member and enter valid member number (e.g. 04) via dial keypad

OR

Press UP or DOWN key to make selection and press RIGHT soft key to move cursor

[81]TRK GROUP MEMBER 01:NONE

[81]TRK GROUP MEMBER 04:NONE

MMC 603 (Page 1 of 2)